Hot Air Oven model YCO-010

Intended Use:

The apparatus is designed for general application in variety of sterilizing medical devices, baking, drying, conditioning, preheating, curing for dry content analysis, chemical resistance studies, glassware drying, dry sterilizer etc., using elevated temperature in the absence of moisture as the sterilizing agent for the inactivation of micro-organisms.

Technical data:

-          Heavy- gauge glass fiber insulation sustains to prevent the heat loss and maximize energy efficiency.

-          Comes with Double wall of exterior steel treated by powder coating ensures scratch free and corrosion free.

-          The height of stainless-steel wire-rod shelf is adjustable in order to meet the various samples.

-          In case of power failure, the built-in battery CMOS #CR2032 can activate and store the preset temperature and passed time. Once power supply resumed, temperature starts to heating and stabilize at the preset point, then Timer counts down the remaining time. User does not need to reset the temperature and timer, not need to press ‘ON’ or any other buttons. Equipment will activate to work automatically.

-          Option for: Castors for easy delivery and No-fuse breaker with O.C.

Specifications :

 Remarks:

-          All measurements are approximate, the allowance is acceptable.

-          Other capacities are available subject to the minimum quantity up to 5 units, such as 150L, 200L, 250L etc.

-          Function preheating with timer working only when the actual temperature at 2ºC below set point.

-          LED digital set and display for Power, Heating, PV, SV, Alarm, Timer and Operation Safety devices.

-          Over temperature alarm and shutout device to 10ºC above the set point.

-          Sophisticated design to shut off power protecting sterilizer from excessive heating at 220ºC if primary control fails.

-          Audible & visible alarm indicated by indicator.

-          Timer stop counting when PV is 5ºC below SV after stabilization if door is opened, or in case of power failure, the memory will store the past time and set-temperature, and start to count when the PV value returns to 2ºC below SV.